![]() |
![]() |
JC100 SERIES | JC200 SERIES | GW-G SERIES | VQ SERIES | |
JC-100 Fluorescent
Pigment FORMALDEHYDE-FREE
PLASTIC COLORANTS With
broad compatibility in most plastics, J COLOR JC-100
fluorescent pigment exhibits many advanced properties:
brilliant clean fluoresce, superior tinting strength,
melt-in type, easy mixing over the range of 135 to 235℃,
low plateout, no formaldehyde emission, good low-temperature
(150 to 180℃)
dispersion, etc. JC-100
series is thus recommended for processes such as extrusion,
injection molding and blow molding. in manufacturing of
toys, safety equipment, graphic sheeting, display packaging,
vacuum-formed products, banners, and many other eye-catching
substance. Available Color Selection Chartreuse JC1010 Red JC1015 Green JC1011 Cerise JC1016
(Coming soon) Orange-Yellow JC1012 Pink JC1017 Orange JC1013 Magenta JC1018 Orange-Red JC1014 Blue JC1019 Key
Specifications of the Pigment: Bulk
density Density Softening
point Processing
Temperature Heat
Stability Average
Particle Size 0.69g/cm3 1.27
g/cm3 70
- 76℃ 135~235℃ 250℃ 20~60
mm -
Formaldehyde-free. Environmental-friendly. -
Melt-in type with low softening point -
Broad processing temperature range between 135 - 235℃ -
Greatly reduced plateout in processing equipment, resulting in
less downtime. -
A neutral additive; dose not add or detract from the lubricity
of the plastic for processing -
excellent heat resistance, Caution:
Some color shift may occur under severe heat conditions. The
addition of one part antioxidant per hundred parts of plastic
to be processed is recommended to minimize color shift. Application
in Plastics As
universal plastic colorant, JC100 pigments are recommended for
the following plastics: LDPE HDPE PP PS ABS PC PA PVC PMMA CAB Urethane + + + + +/- +/- + + + +/- Up
to 50% loading Up
to 50% loading +
recommended +/-
recommended, but thorough test before using is
necessary. Suggested
Colorant Level For
transparent plastics, the fluorescent pigment level needed to
develop fluorescent brilliance versus the thickness of the
plastic part are recommended below: Thickness
(mm) 0.1
- 0.25 0.25
- 0.75 0.75
- 1.5 >
1.5 %
Pigment by Wt 5.0
- 7.5 3.5
- 5.0 2.5
- 3.5 2.0 The
degree of colorfastness of JC-100 pigments depends on the type
of plastic, concentration of colorant, film thickness, type
and direction of exposure. Storage Under
conditions that are cool, dry, covered, away from direct
sunlight and free of airborne contaminates, the shelf life of
the JC-100 pigments will be indefinite. Upon extended exposure
to heat and humidity, JC-100 pigments may form hard lumps that
must be crushed prior to use. Toxicity
Tests conducted through independent laboratories have reported that JC-100 fluorescent pigments are essentially non-toxic. Material safety data sheet or MSDS is available upon request.olor Chemicals makes no warranty on the merchantabilit |
![]() |
![]() |
![]() |
|
![]() |
![]() |
||
![]() |
![]() |
![]() |
![]() |
Copyright © J COLOR CHEMICALS |
![]() |
![]() |